Home | MySQL Russian Manual | MySQL Manual | Apache HTTP Server Rus Documentation | Apache HTTP Server Documentation | downloads | faq

search for in the  Language: Russian

Installation on Unix systems

Table of Contents

This section will guide you through the general configuration and installation of PHP on Unix systems. Be sure to investigate any sections specific to your platform or web server before you begin the process.

As our manual outlines in the General Installation Considerations section, we are mainly dealing with web centric setups of PHP in this section, although we will cover setting up PHP for command line usage as well.

There are several ways to install PHP for the Unix platform, either with a compile and configure process, or through various pre-packaged methods. This documentation is mainly focused around the process of compiling and configuring PHP. Many Unix like systems have some sort of package installation system. This can assist in setting up a standard configuration, but if you need to have a different set of features (such as a secure server, or a different database driver), you may need to build PHP and/or your web server. If you are unfamiliar with building and compiling your own software, it is worth checking to see whether somebody has already built a packaged version of PHP with the features you need.

Prerequisite knowledge and software for compiling:

  • Basic Unix skills (being able to operate "make" and a C compiler)
  • An ANSI C compiler
  • flex: Version 2.5.4
  • bison: Version 1.28 (preferred), 1.35, or 1.75
  • A web server
  • Any module specific components (such as GD, PDF libs, etc.)

The initial PHP setup and configuration process is controlled by the use of the command line options of the configure script. You could get a list of all available options along with short explanations running ./configure --help. Our manual documents the different options separately. You will find the core options in the appendix, while the different extension specific options are descibed on the reference pages.

When PHP is configured, you are ready to build the module and/or executables. The command make should take care of this. If it fails and you can't figure out why, see the Problems section.

User Contributed Notes
Installation on Unix systems
Neil Davis
08-Feb-2008 03:51
On Red Hat EL5.1 you need to install the libtool-ltdl-devel package (or the workaround below) to compile php.

symbolic link libltdl.so to libltdl.so.3.1.4 missing and the compile will fail.

Noting this because it wasn't necessary in Red Hat EL4.1 and caused confusion. I verified this on the box I'm migrating from. Since I built the box, and compiled php on it, I know I didn't need to do this before.

You can get around needing to install this devel.
# cd /usr/lib
# ln -s libltdl.so.3.1.4 libltdl.so

The devel rpm isn't necessary, just the link. I'll leave it at that. This is an rpm packaging convention change with ES5.

packard_bell_nec at hotmail dot com
27-Oct-2007 11:06
If you install PHP as an Apache module, you can consider the following. Instead of adding:

application/x-httpd-php    php
application/x-httpd-php-source    phps

into Apache mime.types, you can add:

AddType application/x-httpd-php    .php
AddType application/x-httpd-php-source    .phps

into Apache httpd.conf, OR you can add:

AddHandler application/x-httpd-php    .php
AddHandler application/x-httpd-php-source    .phps

into Apache httpd.conf. The last one is the preferred way of configuration, but it does not work in previous Apache versions.
phpnet at puellae dot com
17-Oct-2007 05:19
Further down in the links it talks about using the fPIC option in the compiler to fix the SElinux error.  I messed around with it and adding --with-pic to the configure will also allow the module to load.  I have not done more testing with it but apache at least starts.  If you have already compiled you will need to do a make clean before recompiling.
phpnet at puellae dot com
17-Oct-2007 04:16
If you get an apache failing to start message with SElinux enabled.
The error in var/log/messages is:
Oct 17 10:41:49 nwn kernel: audit(1192635709.825:37936): avc:  denied  { execmod } for  pid=23189 comm="httpd" name="libphp5.so" dev=hda3 ino=4980740 scontext=user_u:system_r:unconfined_t:s0 tcontext=user_u:object_r:usr_t:s0 tclass=file

See the following page:

Basically do a chcon -t textrel_shlib_t libphp5.so
It does not sound like it is too dangerous.
aryeh dot friedman at gmail dot com
13-Sep-2007 11:05
For all multi-core processors (not just Sun as noted above) you need to add --enable-shared-core to the apache config
Alex at GrimMusic dot com
13-Nov-2006 08:49
I am new to linux/apache/php (coming from server 2003/IIS/Asp.Net), so i was stumped as to why php/apache could only use static content. Also, it couldn't access some documents that you created somewhere else, and then dragged into the HTML directory.

After some research, i found the problem was the SELinux context of the files. It took me forever to find the Proper command to use to change that, as all the examples on the net were out dated using old commands:
# chcon "user_u:object_r:httpd_sys_content_t" /var/www/html -Rc

This will change the SELinux context of all the documents under the /var/www/html directory (which is the web directory under Fedora), to allow the httpd process to access them, and the '-Rc' flag will make the changes Recursive, and will output it's progress for each file that it sucessfully changes.
01-Oct-2006 04:24
It wasn't until I also added LIBS="-lirc" to the beginning of the configure line that it would configure without errors. It also compiled fine after that. So the start of my configure line looked like this:

LDFLAGS="-lirc" LIBS="-lirc" EXTRA_LIBS="-lirc" ./configure
Arjan van Bentem
12-Jul-2006 07:29
When using Red Hat Fedora, beware of Security Enhanced Linux, SELinux.

Quoted from Red Hat: "The security goal is to make sure that Apache HTTP is only reading the static Web content, and not doing anything else such as writing to the content, connecting to database sockets, reading user home directories, etc."

These limitations include, among many other things, using mkdir to create directories, using fopen to access files, using fopen or get_headers to read URLs, or using exec to run external applications that happen to use sockets (or maybe access some files, but which will run fine when executed from the command line as Unix user apache or httpd -- such as HylaFAX "faxstat" as invoked from nweb2fax recvq.php and sendq.php).

See /var/log/messages for any denials due to the SELinux policy. To disable it:

- System, Administration, Security Level and Firewall
- open the SELinux tab
- click the Transition tree
- check Disable SELinux protection for Apache HTTP
- execute /etc/init.d/httpd restart

See also http://fedora.redhat.com/docs/selinux-faq/ and http://php.net/results.php?q=selinux&p=wholesite
dpresley4 at yahoo dot com
06-Nov-2005 11:42

PROBLEM:  ./configure PHP --with-oci8

fails with unresolved references such as __rpc_thread_destroy@GLIBC_2_2_3_...


FOR SOLVING PHP ./configure RESULTING IN  __rcp_thread_destroy@GLIBC_2_2_3_... AND

KEYWORDS: PHP OCI OCI8 NET8 ./configure __rpc_thred_destroy UNRESOLVED REFERENCES

For building php-4.4.1 or later with oci8, make sure your LD_LIBARRY_PATH has at a minimum the following directories in its path for Oracle8i 8.1.5 or later, Oracle9i 9.0.2 or later, and Oracle9i Release 2: or later, do the following:

Note:  We are not using the Oracle Instant Client here.  This assumes you have an actual Oracle Installation.


Example using Oracle 9i Relase 2 --


2. Set LD_LIBRARY_PATH with:


3. On Unix / Linux, don't forget to export these environment variables:


4. Now, build PHP with the following:

./configure --with-apxs2=<path to Apache 2.0/bin/apxs> --with-oci8=$ORACLE_HOME --enable-sigchild

It should now build correctly. The key with Oracle is to ensure that you pick up the libclntX.so (client librariess) where X is the Oracle version associated with the version your using for instance, in the above example, libclnt9.so

Also note that if your using Oracle 9iAS Release 2 v9.0.2, Oracle 10g iAS Release 1 v9.0.4.1, the above steps will work because ORACLE_HOME will containe all of the libraries necessary.  Simply point ORACLE_HOME to the top level directory of these installations and set LD_LIBRARY_PATH as described above.

Hope this helps.
phptard at gmail dot com
23-Mar-2005 12:17
after a long night of wrestling with mysql4.0 under linux compiled with the intel compiler, i've gotten php5.0.3 to compile with mysql libraries for this flavor of mysql:

1: download the mysql for linux/intel compiler and install
2: download the rpm for the intel compiler libraries and install
3: configure php with LDFLAGS="-lirc -lgcc_s" and EXTRA_LIBS="-lirc -lgcc_s"


LDFLAGS="-lirc -lgcc_s" LD_LIBRARY_PATH="-L/usr/lib64" LD_PATH="-L/usr/lib64" LDPATH="-L/usr/lib64" EXTRA_LIBS="-lirc -lgcc_s" ./configure --with-apxs2=/usr/local/apache/bin/apxs --with-ssl=/usr/local/ssl --without-sqlite --with-zlib-dir=/usr --with-mysql=/usr/local/mysql

of course this is on a xeon system that has half of its modules in the /usr/lib64 directory, so on a normal system, without the other kruft, it would look something more like this:

LDFLAGS="-lirc -lgcc_s" EXTRA_LIBS="-lirc -lgcc_s" ./configure --with-apxs2=/usr/local/apache/bin/apxs --with-mysql=/usr/local/mysql

Hopefully this will save someone the 6 hour headache it caused me..
alexander justadot henry at acm dot org
22-Dec-2004 08:48
The system at my workplace has a need for apache/php with all static compilation.  In order to save time adminning our systems, I decided to make my own RPM of php/apache with mod_ssl support.  I had always installed by hand with the instructions on this page, but when buiding the RPM way, came upon the following error when apache was compiling:

===> src/modules/php4
make[4]: *** No rule to make target `all'. Stop.

Ordinarily this is because one did not do a 'make install' in php before the second apache configure, or somehow the make install failed.  But the way rpm's work, the make install must be in the %install portion of the spec file, after all makes are completed.

make install-sapi

This line will copy relevant files to the directory specified in --with-apache
thansen at terra dot com dot br
31-Dec-2003 04:36
The configure directives --with-apxs2 and --with-apxs2filter are not compatible one with other, even though the configure script will not complain about that. Each one affect the way Apache will call the php parser: If you choose the first one, you must use the traditional include:

AddType application/x-httpd-php php

at httpd.conf, to call the parser. If you use the --with-apxs2filter, the include will be:

<Files *.php>
        SetOutputFilter PHP
        SetInputFilter  PHP

, and php will be called as a filter to .php files.

If you use both together, you will get compilation errors (duplicate symbols while linking libphp4).
aaronmorris at mindspring dot com
05-Dec-2003 08:47
If you have the libphp4.a instead of libphp4.so on AIX, you can extract the .so file from the .a file by running "ar -x libphp4.a".
doug at NOSPAM dot techie dot net
04-Feb-2003 01:16
Users compiling under some versions of Solaris/SunOS may encounter the following error.
   symbol ap_block_alarms: referenced symbol not found

To address this problem, add the following additional flag to the Apache build configure line:

So, adding this to the original instructions, you'd configure your Apache build like so:
   ./configure --prefix=/www --enable-module=so --enable-rule=SHARED_CORE

dimaberastau at hotmail dot com
10-Jun-2001 04:33
when installing with mysql support (--with-mysql=<path/to/your/mysql>) via Apache APXS you'll probably get something like 'can't load libmysqlclient.so' when you try to start up apache. There are 2 solutions to this problem. First, (as documented in INSTALL file of the php4 distribution) you can modify /etc/ld.so.conf to contain the directory name where libmysqlclient.so is (so if your mysql is installed in /usr/local, you want to add something like /usr/local/lib/mysql into /etc/ld.so.conf), else (and particularly if you haven't got the super-user on the system) you can modify (or create if it isn't defined already) LD_LIBRARY_PATH shell variable to reflect the changes you would have otherwise made to /etc/ld.so.conf (again if mysql is /usr/local LD_LIBRARY_PATH=/usr/local/lib/mysql). Either one of these methods will get the problem sorted. Just remember to run ldconfig (so that /etc/ld.so.cache is updated) if you chose to modify /etc/ld.so.conf
marshalm at ebrd dot com
17-May-2001 05:43
HP-UX 11.X PA-RISC installation with oracle (oci8). You need to install the HP-UX patch PHSS_22514 patch (updated libdld.sl), otherwise you will get errors with dlopen() and dlclose() not found during the apache integration stage.

credits | contact